DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, High Performance Dry Bath Heating Block "MaXtable
TM
H20"
9/22
Do not use the product on a high place or at high temperature. Do not use the
product near the heater or the wind of air conditioner.
The accident by the overheating of the equipment can occur.
WARNING
This product must be used within the permitted standard load resistance.
Do not cut or process the power cord or do not bend it by force or pull or tie up it.
In addition, if heavy things are placed on the power cord, the power cord may be
damaged and it may become the root cause of a fire or an electric shock.
Insert the plug securely into a wall socket.
Loose connections result in excessive heat generation to the device and may
cause arcing to occur at the connection.
Avoid using multi-point extension power cords. It may cause excessive heat
generation and be the cause of a fire.
If you extend the power cord, use the cord to have sufficient electric capacity.
The fluctuation of main power voltage should be lower than +/-10% of the nominal
voltage.
Please separate the power plug from the outlet for safety when the product is
unused for long periods of time to avoid overheating or ignition due to dust..
If water or organic solvent flows in the regulator part of the product or the interior
of the body, the worry about short circuit exists. Do not install the product at the
place where water or organic solvent is exposed.
If unexpected sound, smell or smog is generated, pull the main plug out from the
wall socket and contact the technical assets of DAIHAN Scientific
Please avoid the disassembly or modification of this product by a non-authorized
person to avoid serious electrical problems and to retain the warranty service of
DAIHAN Scientific Co., Ltd.
Do not dismantle or transform the product by unauthorized person. It induces the
severe electric problem, and you cannot receive the warranty service in that case.
Do not touch the device with wet hand while operating.
Please do not directly spray water on the product or wash it with water, to avoid
short circuits or electric shock.
