DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, High Performance Dry Bath Heating Block "MaXtable
TM
H20"
13/22
3. Product Usage
3.3 Usage Instructions
3.3.1Setting TIMER
1. Confirm whether the power cable is normally connected or
not.
2. Press the power switch which is positioned at the back side
of the product.
3. The display for the setting of Timer will appear initially.
4. The figures to be displaying on PV represent the remaining
time determined by the timer whereas the figures displaying
on SV represent the time set by the timer.
5. Rotate the rotary switch on the controller clockwise or
counterclockwise to adjust the set values of the timer. The
range of values of the time set by the timer can be up to 99
time and 59 minutes and the set value will be varying by a
unit of 1 minutes.
6. Push the Rotary Switch once and shortly then the product
will start the timer operation.
7. Push the Rotary Switch once shortly in the display of setting
of timer during an operation of the product then the
product in its timer will stop thereby.
8. When the value of timer is set 0 then the product will
operate with set value continuously. In the case the value of
timer is entered into the product then the product will stop
its operation of heating with an alarm on the expiry of the
set value of timer.
9. Push the rotary switch for 2~3 seconds then the set value of
timer will be blinking and be stored thereby. The stored
value of timer that remaining unchanged will be reappearing
by the next turn-on of power supply.
