DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, High Performance Dry Bath Heating Block "MaXtable
TM
H20"
20/22
Ø
Cleaning of the product
Maintain the cleaning state of the product by regular cleaning. The regular maintenance of the
product extends the use period of the product and minimizes the contamination of specimen.
1. Confirm whether or not any foreign matters exist, and if yes, immediately wipe off them.
2. Do not use abrasive or detergent based on solvent.
3. If a chemical substance stains the product, wear gloves and a mask which are composed of
chemical resistance material, and wipe off them with a piece of dry cloth.
4. When cleaning the product, you must separate the power cord from the body.
5. For the part from which the contaminant is not easily erased, wipe off only the part with
the towel wetting with the solvent that has low freezing point.
6. If the materials wetted by liquid or water are entered into this product, please immediately
disconnect the power of the product and stop its using.
7. Be careful so that the solution is not overflowed to the outside of Block.
8. When replacing the Block, please replace it using the Block Extraction Tool which is a
component after that the product has been sufficiently cooled.
9. After making sure periodically whether the foreign material exists inside the Block, please
remove the foreign material, if it exists.
Ø
Disposal of the product
When the warranty period of the product is terminated, it should be disposed in
accordance with the management regulation of wastes of the corresponding
territory.
Ø
Storage of the product
1. If the product is not used for long time, separate the power socket from the body, wrap and
store it.
2. Store them in the same place not to lose the components.
