
36
Select the PTZ control to see DVR PTZ control menu.
z
Input number i+PT (i=channel number), you can open the local PTZ control menu via
the keyboard.
3.3.7 Remote Operation (RS485)
3.3.7.1 The keyboard settings after PTZ connection
Before the operation, please make sure:
1) The A, B cable of the keyboard properly connects to the A, B cable of the speed
dome.
2) Turn on the speed dome and connect the video cable to the monitor.
3) Set the speed dome address. Please make sure your keyboard RS485 address shall
be the same with the speed dome address here.
4) In the keyboard menu, from the Advanced->PTZ, you can set protocol, address, baud
rate, data bit, stop bit, parity and etc. You can select the protocol according to your
speed dome and RS485 address is the same as the speed dome.
5) Please save current setup.
3.3.7.2 Operation
In this mode, you can use the network keyboard to control the PTZ of the speed dome.
Please input the number 0+PT to enable PTZ control.
Please refer to chapter 3.3.5.5 Pan/Tilt/Zoom for detailed information.
3.3.8 Remote
Control
Remote control interface is shown as in Figure 3-50.
Figure 3-50
Please refer to the following sheet for detailed information.