Dahua NKB Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 58

Dahua NKB Скачать руководство пользователя страница 41

34

z

In menu setup interface, you can skip to the previous

item.

Play next

z

When playback, click it to play the next file.

z

In menu setup interface, you can skip to the next item.

Record

Click the REC button, you can see Record interface. You can use the shuttle/jog to set the
channel number and status. Click the ENTER button to save current setup and click the
ESC button to exit.

One-window/multiple-window mode switch

Use the jog (inner dial) to select the window amount and use the shuttle (outer ring) to
switch the displayed channel.
Click the number button, you can see selected channel. For example, click number 1; you
can see channel 1.
If you input channel number is more than 10, you can work with the CAM button. The input
method is CAM+channel CAM. For example, click CAM+12+CAM, you can go to
channel 12.

PTZ control and color

In window-display mode, there are two ways for you to see the PTZ control interface.

z

Click the PT button in the keyboard to enable the AUX function: PTZ control and color.

Select the PTZ control to see DVR PTZ control menu.

z

Input number i+PT (i=channel number), you can open the local PTZ control menu via

the keyboard.

3.3.6 Remote Operation (RS232)

3.3.6.1 The keyboard setup after COM Connection

Before the operation, please make sure:
1) The keyboard and the DVR connection are right.
2) The DVR settings are right. In the DVR main menu, from Setting->RS232, in the

Function item, please select net keyboard from the dropdown list. You need to set the
baud rate, stop bit, data bit, parity and etc. System default setup is:

Baud

rate:9600:

Data

bit:8,

Stop

bit:1,

Parity:

none.

3) For the keyboard, from the Advanced->COM, here you can input remote address,

baud rate, data bit, stop bit and parity.

Please note:

z

Remote address: It is a SN for the front-end to detect. It is the DVR No. in the General

interface. You can use move the cursor to the remote address or use the shuttle(outer
ring) to select the remote address, input the value directly or you can jog(inner dial) to
select.

z

Please make sure the keyboard setups are the same with the DVR.

«
...
39
40
41
42
43
...
»

Содержание NKB



























































Отзывы:

Нет отзывов