Dahua Network Camera Web 3.0, Руководство по эксплуатации

Страница: 103 / 144

Dahua Network Camera Web 3.0 Operation Manual
95
Select
“Setting > Event > Face Recognition > Face Detection” and the system will display the interface
of
“Face Detection”, which is shown in Figure 5-65.
Figure 5-65
Step 2
Select
‘Enable” to enable the function of face detection.
Step 3
(Optional) Click
‘Draw Target” and you can draw the size model of filter target in the monitoring image.
Step 4
It is to set the parameters of face detection, please refer to the following table for more details.
Parameter Function
Period
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1.
Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:

You can input time numerical value or press the left mouse button to
drag on the setup interface to set.

There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.

Select week number (it selects Sunday by default, if it selects the whole
week, then it means the setup can be applied to the whole week, you
can also select the check box in front of the week number to implement
independent setting for some days).
3.
Click “Save” to complete the setup of working period.