Local Configurations
31
Remote device
Figure 4-10
Click
Device Search
.
Step 2
The searched devices are displayed.
Enable
Uninitialized
function.
Step 3
The uninitialized devices are displayed.
Select the check box the uninitialized device, and then click
Initialize
.
Step 4
The
Password Setting
interface is displayed.
Configure the password by either of the following two ways.
Step 5
Using current device password and phone info. Select the
Using current device
password and phone info
check box, and the remote device uses the
password and phone info of the Device.
Manually configure password for remote devices.
1) Clear the
Using current device password and phone info
check box.
The password setting interface is displayed.
2) In the
New Password
box, enter the new password and enter it again in the
Confirm Password
box. Click
Next
.
The
Password Protection
interface is displayed.
3) Set up password protection.
◇
Select the
Phone No.
check box, and then enter the phone number. Click
Next
.
◇
Click
Skip
if you do not want to set up password protection.
The
Network
interface is displayed.
Configuring network information.
Step 6
Set up the network information of the remote device according to your network
plan, and click
Next
.
◇
Select
Static
, and manually set up the IP address, subnet mask, and
gateway of the remote device. If selecting multiple devices, you can set up
the IP address to increase in turn.
◇
When there is a DHCP server in the network, select
DHCP
, and the Device
obtains IP addresses from the DHCP server automatically.
