Mobile DVR Installation Instruction Guide
5
2
Device Installation
2.1
Device General Introduction
2.1.1 Front Panel
The front panel is shown as in Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
SN
Name
Port and Indicator Light
1
RJ45 Ethernet port
1 network port.
USB port
2 USB ports to connect to mouse or flash disk to backup
data.
2
Door
lock/unlock
(Device
on/off
button)
Please unlock the device before you remove the
HDD box. Otherwise system is going to shut
down automatically.
System cannot boot up once the button is unlock.
Please lock the device first and the boot up the
device. It is to protect the HDD.
3
PWR
Power indicator light.
The red light is on when the device is running.
The light is off when the device is off.
4
REC
Record indicator light.
The blue light is on when system is recording.
The light is off when system is not recording.
5
HDD
HDD indicator light.
The blue light is on when there is HDD.
The light is off when there is no HDD.
6
ALM
Alarm indicator light.
The blue light is on when there is an alarm.
The light is off when there is no alarm.
7
IR
It is to receive the signal from the remote control.
