Mobile DVR Installation Instruction Guide
30
Figure 12
2) The proxy server software developed from the SDK. Please open the software and input the global
setup. Please make sure the auto connection port here is the same as the port you set in the previous step.
3) Now you can add device. Please do not input default port number such as the TCP port in the mapping
port number. The device ID here shall be the same with the ID you input in Figure 12. Click Add button to
complete the setup.
4) Now you can boot up the proxy server. When you see the network status is Y, it means your registration
is OK. You can view the proxy server when the device is online.
Important
The server IP address can also be domain. But you need to register a domain name before you run proxy
device server.
3.5
FAQ
Q:
I can not boot up the mobile DVR.
A:
Please check power supply is proper or not. Then check the key power is open or not (ACC signal).
The device can boot up after you enabled the power.
Q:
One channel video is missing in preview mode.
A:
Please check corresponding channel signal input is proper or not.
Q:
Device does not delay but I have enabled key power (ACC) latch function.
A:
Please check power cable and ACC signal cable connection is OK or not.
