Mobile DVR Installation Instruction Guide
22
From Main menu->Vehicle->Auto Maintain, Here you can set auto-reboot time and auto-delete old files,
auto shutdown, and auto ACC delay (0-65535 minutes) setup. You can set to delete the files for the
specified days. See Figure 5.
You can select proper setup from dropdown list. After all the setups please click save button, system goes
back to the previous menu.
Note
The auto boot up and ACC delay function is only valid when vehicle ACC signal connection is OK. The
auto shut down has higher priority than ACC delay. If you enable these two functions at the same time, the
ACC delay function is null.
System default setup is to restart on each 2:00 Tuesday.
Figure 5
3.4.3 Encode
From main menu->Setting->General, you can see encode setting includes the following items. See Figure
6.
Channel: Select the channel you want.
Type: Please select from the dropdown list. There are two options: regular/alarm.
Compression: System supports H.264.
Resolution: System supports various resolutions, you can select from the dropdown list. The first two
channels support HDCVI 1080P resolution. The last two channels support HDCVI 720P resolution.
System default setup is HDCVI 720P. Please make sure you are connecting to the HDCVI 1080P
camera if you want to realize 720P/1080P resolution. For 4-channel analog channel, system supports
4-channel 960H resolution. System does not support audio function.
Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.
Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality.
Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image quality.
Video/audio: You can enable or disable the video/audio.
