- 42 -
[IRIS+] to save and return to the upper grade menu.
☆
Small tip
When manually adjusting, if the focus length is far, due to the high sensitivity
of the IR High Speed Dome Camera, the image will move very quickly even if
the joystick is slightly touched, which may cause the lost of image; when the
Focus Length is near, the image may trembles. Well, due to some special
configuration inside the IR High Speed Dome Camera, the unit can
automatically adjust the pan and tilt speed, so that the manual operating
object-tracing could be more convenient and much easier.
7. IDLE TIME
Operate the joystick to move the cursor to
[IDLE TIME]
option, press
[FOCUS+] key to increase the time, press [FOCUS-] to decrease time.
☆
This configuration allow the IR High Speed Dome Camera has a period of
idle time (1-240Minutes), after which it will carry out IDLE Time Function
which is set by the user in advance. Default configuration is 0, which means it
will not carry out any action.
8. IDLE TIME FUNCTION Activated
Operate the joystick to move the cursor to
[IDLEACTIVATE]
option,
repeatedly press [FOCUS+] key to choose required option (
OFF, PRESET64,
AUTOSCAN, TOUR 1
).
☆
[IDLEACTIVATE]
means the action which is to be carried out after it is
activated. If the
[IDLE TIME]
is configured as 0, this configuration is invalid.
9. IR TRIGGER
[IR TRIGGER]
is in the lower menu of
[PAN/TILT SETUP]
, when entering the
[PAN/TILT SETUP]
menu, operate the joystick to move upwards or
downwards to display the second page, now the cursor is at
[5 IR TRIGGER
PHOTOSENSE]
. There are PHOTOSENSE/CAMERA switchable. Press
[FOCUS+] key to choose.
A. If [CAMERA] is chosen
, the IR lamp is controlled in accordance with the
conversion of the camera module between Color and Black&White mode.
