- 29 -
VII.
Configuration and Operations through the OSD Menu
7.1 Basic Operation
7.1.1 Power on and self-check of the IR High Speed Dome Camera
Once power on, the unit enters self-checking procedure. The unit pans
slowly to the default horizontal 180° postion, then tilt to 20°. The lens zoom
from far to near, then from near to far. During the self-checking process, the
corresponding information of the system will be displayed on the screen, as
shown below:
When the self-checking is finished, the title of the IR High Speed Dome
Camera ―IR HI-SPEED DOME‖ and the title of the location ―180
°
20
°
‖ will
be displayed. This indicates operations over the system can be carried out
now. The detailed operation method will be introduced in the later chapters.
(Remark: If the unit is in normal running state when power off, then, once
power on, after self-check, the unit will resume the previous state (such as
invoking preset position, Left & Right scan, cruising tour, 360º scan, alarm
linkage etc)
7.1.2 Enter and exit the Main Menu
⑴
The Main Menu will be displayed when press ―95 PREVIEW‖ (the
operation is as invoking the 95
th
preset position) or invoke Preset Position
VERSION NO.: V1.00
PROTOCOL: PELCO_D
ADDRESS: 001
BAUDRATE: 4800.N.8.1
