Dahua IPC-HDBW3300 Скачать руководство пользователя страница 22

Страница: 22 / 65

Please refer to the following sheet for detailed information.

Parameter

Function

Channel

Here is for you to select a monitor channel.

Channel Name Here is to display current channel name. You can modify it .

Compression

H.264

Main Stream

It includes general stream, motion stream and alarm stream. You
can select different encode frame rates form different recorded
events.

System supports active control frame function (ACF). It allows
you to record in different frame rates.

For example, you can use high frame rate to record important
events, record scheduled event in lower frame rate and it allows
you to set different frame rates for motion detection record and
alarm record.

Extra Stream

Select extra stream if you enabled the extension stream to
monitor.

Audio/Video

Main stream: Recorded file only contains video by default. You
need to check the audio box here to enable audio function.

Extra stream: Recorded file only contains video by default. You
need to check the audio box here to enable audio function.

Resolution

There are multiple resolutions. You can select from the dropdown
list.

For each resolution, the recommended bit stream value is
different.

Frame Rate

PAL: 1

～

25f/s

，

NTSC: 1

～

30f/s..

The frame rate may vary due to different resolutions. When the
resolution type is 3M, PAL:1-15f/s,NTSC:1-15f/s.

Bit Rate Type

There are two options: VBR and CBR.
Please note, you can set video quality in both modes.

Quality

The value ranges from 1 to 6. The level 6 is the best video
quality.

Bit Rate

In CBR, the bit rate here is the max value. In dynamic video,
system needs to low frame rate or video quality to guarantee
the value.

The value is null in VBR mode.

Please refer to recommend bit rate for the detailed information.

Recommended
Bit

Recommended bit rate value according to the resolution and
frame rate you have set.

Содержание IPC-HDBW3300


































































Результаты поиска

Содержание IPC-HDBW3300

Отзывы:

Dahua IPC-HDBW3300, Руководство по эксплуатации, Страница: 22 / 65

Результаты поиска

Содержание IPC-HDBW3300

Отзывы: