Dahua DHI-ITARD-024MA-T4, Руководство пользователя

Страница: 14 / 30

User's Manual
8
4 Client Operations
In the client, you can set parameters such as the installation height, pitch angle, deflection angle,
and horizontal offset.
4.1 Modifying Parameters
This section describes how to debug the network port. The procedure of debugging the network
port is the same as that of debugging the serial port and WI-FI.
Step 1
Log in to the client, click MainMenu , and then click LineDevice .
Figure 4-1 Connect the Radar to the network
Step 2 Select
TCP
, enter an IP address and a port number, and then click
OK
.
●
The default IP address is 192.168.1.108, and the default port number is 5004.
●
The default baud rate of RS-485 is 9,600 bps, and the default WI-FI password is
DAHUA123.