Installation 5
Confirm position of screw holes (and the cable outlet hole if it needs to go through the
Step 2
mounting surface
①
) as the positioning map
②
indicates, then drill the holes on the
mounting surface
①
, and then insert the expansion bolts
③
into the screw holes.
Align the screw holes on the pedestal
④
to those on the mounting surface
①
, and then
Step 3
pull the cable out through mounting surface or the side cable tray. Attach the pedestal
④
to the mounting surface
①
with the self-tapping screws
⑤
.
Put the locking screw
⑧
and the enclosure
⑦
back to hold the device
⑥
, and then
Step 4
connect the camera to power source and the XVR device. The live view screen is
displayed.
Aim the lens to the ideal angle, and then fasten the locking screw. See Figure 3-2.
Step 5
Model A adjustment
Figure 3-2
①
is the locking screw.
Installing Model B
3.2
Model B installation
Figure 3-3
Table 3-2 Installation item list
No.
Item
No.
Item
①
Device
②
Self-tapping screw
③
Expansion bolt
④
Mounting surface
Confirm the position of screw holes (and the cable outlet hole if it needs to go through
Step 1
the mounting surface
④
), then drill them on the mounting surface
④
, and then insert the
expansion bolts
③
into the screw holes.
Align the screw holes on the bracket to those on the mounting surface
④
, and then pull
Step 2
the cable out through mounting surface or the side cable tray. Attach the bracket to the
mounting surface
④
with the self-tapping screws
②
.
