Dahua ARC6416C series Скачать руководство пользователя страница 6

Страница: 6 / 117

Important Safeguards and Warnings

Please read the following safeguards and warnings carefully before using the product in

order to avoid damages and losses.

Note:



Do not expose the device to lampblack, steam or dust. Otherwise it may cause

fire or electric shock.



Do not install the device at position exposed to sunlight or in high temperature.

Temperature rise in device may cause fire.



Do not expose the device to humid environment. Otherwise it may cause fire.



The device must be installed on solid and flat surface in order to guarantee safety

under load and earthquake. Otherwise, it may cause device to fall off or turnover.



Do not place the device on carpet or quilt.



Do not block air vent of the device or ventilation around the device. Otherwise,

temperature in device will rise and may cause fire.



Do not place any object on the device.



Do not disassemble the device without professional instruction.

Warning:



Please use battery properly to avoid fire, explosion and other dangers.



Please replace used battery with battery of the same type.



Do not use power line other than the one specified. Please use it properly.

Otherwise, it may cause fire or electric shock.

Special Announcement



This manual is for reference only.



All the designs and software here are subject to change without prior written

notice.



All trademarks and registered trademarks are the properties of their respective

owners.



If there is any uncertainty or controversy, please refer to the final explanation of

us.



Please visit our website for more information.

Содержание ARC6416C series






















































































































Результаты поиска

Содержание ARC6416C series

Отзывы:

Похожие инструкции для ARC6416C series

Бренды по названию

Популярные бренды

Dahua ARC6416C series, Руководство пользователя

Результаты поиска

Содержание ARC6416C series

Отзывы:

Похожие инструкции для ARC6416C series

Бренды по названию

Популярные бренды