Dahua ARC6416C series Скачать руководство пользователя страница 96 | Manualshive

Страница: 96 / 117

background image



When you are sure that the audio output is connected to the speaker, click

, you can play

audio, click button to change to

.



Click

to delete audio file.

6.5.4

Account

Default User and Right

The default user names of the device are admin, 888888, and hidden

“default”.



admin: factory password and user name are the same, the factory default is a high-

privileged users.



888888: The factory password is the same as the user name. By default, the factory

password is a high-privilege user. However, the network client cannot log in.



hidden “default”: This user is used within the system, cannot be deleted. When the local user
is in the "no user login" state, the system will automatically use this account login. The user

can modify the account rights; some of the operations can be performed without a login.

Users with the "User Management" privilege can modify the rights of the default account.



For user-friendly management, it is recommended that the authority of ordinary users be

lower than the advanced users when user defines authority.

User Group and User

User management have user and user group, each user name and group name are exclusive.



The system supports a maximum of 64 users, 20 user groups.



Default settings include user and admin two groups, cannot be deleted.



A user in a group can m

odify rights within the group’s rights. But 888888 and admin users

cannot arbitrarily designate.



Each user must belong to a group, a user can only belong to one group; select the group,

the user's rights can only be a subset of the group rights, cannot exceed the group's right

attributes.



The string length of a user name and a user group’s name is up to 16 bytes. It must be
composed of letters, numbers, underscores, minus signs, dots, commas, and so on. First

and last byte cannot be blank.

6.5.4.1

Account

Before you add user, make sure the user group of the user you want to add exists. If not, please

add user group first, see Ch 6.5.4.2.

Step 1. Select Setup>System>Account>User, see Figure 6-60.

«
...
94
95
96
97
98
...
»

Содержание ARC6416C series






















































































































Отзывы:

Нет отзывов

Похожие инструкции для ARC6416C series

Бренд: Ultrative Страницы: 9

PlayWorks PS2000 Digital

Бренд: Cambridge SoundWorks Страницы: 22

MegaWorks THX 2.1 250D

Бренд: Cambridge SoundWorks Страницы: 13

Бренд: Cambridge SoundWorks Страницы: 14

Бренд: Eaton Страницы: 12

Бренд: M-system Страницы: 3

Бренд: Magmaweld Страницы: 8

AZ8350 - Cd Radio Cass Recorder

Бренд: Magnavox Страницы: 18

Бренд: MAGINON Страницы: 6

Бренд: Magmate Страницы: 20

Бренд: VHD Страницы: 2

Бренд: Waters Страницы: 116

Бренд: RainWater Harvesting Страницы: 3

Бренд: Phoenix Страницы: 27

Бренд: bester Страницы: 68

Бренд: STEINEL Страницы: 24

MEGApix DWC-MV82WiA

Бренд: Digital Watchdog Страницы: 2

MIP SYSTEM 3 B7835

Бренд: LLOYTRON Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды