Dahua Technology VTH2421F Series Скачать руководство пользователя

Страница: 58 / 127

Table 3-5 Interface description

Icon

Description

Remotely unlock the door where the VTO is located.

The system provides 2-channel unlock function. If the icon is

gray, it means that unlock function of this channel is not

available.

Take snapshot.

An SD card is needed to use this function.

Tap to start recording, and it will stop when the call is
completed or by tapping

If the SD card is full, the oldest videos will be overwritten.

An SD card is needed to use this function.

If the VTH is connected to multiple VTOs/IPCs, tap

and

to switch device.

Exit monitoring.

Tap to speak to the other end device, and tap again to stop.

3.4.2 Monitoring IPC

3.4.2.1 Adding IPC

Background Information

●

IPCs added to the main VTO and DSS Express/DSS Pro will be synchronized to the VTH. The

synchronized IPCs cannot be deleted.

●

Before adding an IPC, make sure that it is powered on, and connected to the same network as the

VTH.

Procedure

Step 1

Select

Monitor

IPC

Содержание VTH2421F Series
































































































































Результаты поиска

Содержание VTH2421F Series

Отзывы:

Похожие инструкции для VTH2421F Series

Бренды по названию

Популярные бренды

Dahua Technology VTH2421F Series, Руководство пользователя

Результаты поиска

Содержание VTH2421F Series

Отзывы:

Похожие инструкции для VTH2421F Series

Бренды по названию

Популярные бренды