User's Manual
8
Figure 4-3 Flashlight/strobe cable connection
Step 1
Plug the flas (yellow) and flashlight - (blue) of the Illuminator into the flashlight
triggering port F1+/F2+ and F1-/F2- of the camera.
Step 2
Plug the (green) and strobe - (gray) into the strobe triggering port F7+ and F7- of
the camera.
There are 7 ports on the camera, among which F1 to F6 are flashlight ports and F7 is strobe
port by default. You can change them on the
Light Config
page on web. For details, see
"5.1 Configuring External Light".
4.4 Connecting RS-485 Cable
Connect the RS-485 signal cable.
Figure 4-4 RS-485 cable connection
Step 1
Connect the RS-485 A (red) cable of two illuminators in parallel circuit, and then connect
the 485-A port of the camera.
