Quick Start Guide
18
4 Installation
4.1 Wall Mount
Step 1
Paste the positioning map to the wall at an appropriate position.
Step 2
Drill holes through the marks on the map.
Step 3
Hammer in the expansion tubes, and then remove the map.
Figure 4-1 Hammer in the expansion tubes
Step 4
Slide up the front panel of the Access Controller and remove the panel.
Figure 4-2 Remove the front panel
Step 5
Attach the back panel of the Access Controller to the wall with self-tapping screws.
Step 6
Wire the Access Controller, bind the wires with nylon cable ties, and then cut off the excess
part of the ties.
