Dahua Technology DH-PFR4K-B240, Руководство пользователя

Страница: 38 / 102

User’s Manual
32
Aim to the feet of A and adjust the PTZ camera image to make sure the target 3)
takes up 1/2 of the image.
Click to save the settings. 4)
For separate installation, repeat the above steps to add the second set of radar
coordinate. PTZ camera and the two sets of coordinates must not on the same
straight line.
Select a target point (More than 10 m away from the camera is recommended) with 5)
the same height as the lens. Adjust monitoring image of the camera by using PTZ
control icons to move the crosshair to the target point, and then click
Acquire
calibration value .
Enable
Alarm Track
on the interface, and then click
Save
. 6)
4.1.4 Region Management
You can add different types of regions, draw alarm, pre-warning, or shield areas, set arming periods,
filter objects in regions, and more.
Select Setting > Radar Settings > Region . Step 1
Region Figure 4-16
Click to add regions. Regions are enabled by default. Step 2
Double-click the name under the
Name
column to modify the region name. Step 3
Select
Area Type
from
Intrusion
and
Tripwire
. Step 4

Intrusion: When the target enters, leaves, or appears in the detection area, the system
performs alarm linkages.

Tripwire: When the target crosses tripwire from the defined motion direction, the
system performs alarm linkages.
Click
Draw Rule
to draw a line or an area within radar detection range. Step 5
Click the left mouse button to start drawing, and then click the right mouse button to end
drawing.