Quick Start Guide
16
Keep the original packing material well because you might need it to pack the Camera and send
it back for repair if any problem arise.
Make sure that the place where the Camera is installed has enough space to hold the Camera
and its mounting accessories.
Make sure that the ceiling and wall can sustain 8 times the weight of the Camera and its
mounting accessories.
Make sure that the wall is thick enough to install expansion bolts (Users need to buy expansion
bolts separately).
Installation Method
3.2
Installation method
Figure 3-3
(Optional) Installing SD Card
3.3
SD card slot is available on select models.
Disconnect the power before installing or removing the SD card.
Do not open the cover for more than 30 min to avoid spray in cameras.
Press and hold the reset button for 10 seconds to default the device.
