Quick Start Guide
4
2 Network Configuration
Device initialization and IP configurations can all be managed with the ConfigTool or through the
web page. For more information, see the web operation manual.
●
Device initialization is available on select models, and is required at first-time use and after the
device is reset.
●
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the computer are on the same network segment.
●
Carefully plan the network segment to connect the device to.
●
The following figures and pages are for reference only.
2.1 Initializing the Camera
Step 1
Double-click ConfigTool.exe to open the tool.
Step 2
Click Modify IP.
Step 3
Click Search Setting.
Figure 2-1 Setting
Step 4
Select a searching method.
●
Current Segment Search (default)
Select the Current Segment Search checkbox. Enter the username and password in
the Username and Password boxes respectively. The system will search for the devices
accordingly.
●
Other Segment Search
Select the Other Segment Search checkbox. Enter an IP address in the Start IP box and
End IP box respectively. Enter the username and password, and then the system will
search for the devices.
●
If you select the Current Segment Search checkbox and the Other Segment Search
checkbox, the system searches for devices under both conditions.
●
Enter the username and password when you want to change the IP address, configure
