Network Configuration
15
Configuring Local SD Card Recording
The devices Web interface contains settings to control the recording medium and to configure
an alarm that triggers once the Micro SD card passes a pre-determined storage.
Access the Web Interface for the device and click the Setup tab. Expand the Storage
menu, then choose the Destination page.
Select the recording medium for each event Recorded and Snapshot event, Scheduled,
Motion Detect and Alarm. Select the Local check box to record an event to the Micro SD
card.
Click the Local tab to view the used capacity and the total capacity of the Micro SD card.
Expand the Event menu, located at the left of the Web interface, then select the
Abnormality page to set alarms related to the Micro SD card. The contains the following
Micro SD card alarm options:
No SD Card: Device triggers an alarm if the device does not contain a Micro SD card.
Capacity Warning: Device triggers an alarm when the data on the Micro SD card passes
a defined threshold.
SD Card Error: Device triggers an alarm if it detects an issues writing data or retrieving
data from the Micro SD card.
Select the event from the Event Type pull-down menu (No SD Card, Capacity Warning, SD
Card Error).
Check the Enable box to activate the alarm for this event.
