Camera Installation
10
Connect the incoming cables routed through the wall mount to the corresponding power,
Ethernet, audio, and alarm cables from the dome composite cable.
Caution:
Connect the Earth Ground cable to the YELLOW/GREEN cable (contained in the
VAC Power bundle) to ensure the camera is well grounded.
Pull the connected cables into the wall mount bracket with care.
Align the straight edge of the flange on the dome with the straight edge of the mount
bracket. Slowly push the dome into the wall mount.
Insert the three (3) stainless steel set screws into the corresponding holes on the wall
mount flange and tighten to dome flange with the hex wrench.
Ensure the safety tether is attached to wall mount and to the camera.
