13
7. Secure the wall mount bracket to the wall using four M6 x 15 screws with the four (4) hex screws
and four (4) flat washers.
8. Connect the safety tether to the dome and to the hook on the wall mount.
9.
Figure 4-3
10. Connect the incoming cables routed through the wall mount to the corresponding power, Ethernet,
audio, and alarm cables from the dome composite cable.
Caution:
Connect the Earth Ground cable to the YELLOW/GREEN cable (contained in the VAC
Power bundle) to ensure the camera is well grounded.
Installing the Camera
1. Pull the connected cables into the wall mount bracket with care.
2. Align the straight edge of the flange on the dome with the straight edge of the mount adapter
quick installation port. Slowly push the dome into the wall mount.
3. Secure the M6 x 14 stainless screw with a spring washer, located at the front of the wall mount, to
the ø6.5 mm hole on the dome flange with the torx wrench.
4. Ensure the safety tether is attached to wall mount and to the camera.
