7. Route the incoming cables through the connection pole
8. Wrap several turns of Teflon tape around the threads of the connection pole then affix the pole to
the connection plate.
9. Tighten the M4 bolt on the connection plate to secure the pole to the plate.
10. Push the decorative cover towards the ceiling to cover the connection plate.
11. Wrap several turns of Teflon tape around the threads of the PFA110 Mount Adapter Block.
12. Screw the PFA 110 Mount Adapter Block into the internal thread of the PFB300C Ceiling Mount
until secure and then fix the set screw on the PFB300C Ceiling Mount.
13. Make wire connections to composite cable and then carefully push the cables back into the
connection pole.
17
Set Screw
PFA 110
PFB 300C
