4.4
Mounting the Camera to a Ceiling
The dome camera can be mounted to a solid ceiling with the optional PFA150 Pole Mount Adapter.
This adapter uses three metal straps to secure the camera to a pole with a diameter of 100 mm to 380
mm (4 in. to 15 in.).
Use the following accessories to complete this installation:
PFA110
Mount Adapter
PFB300C
Ceiling Mount
Mounting the Camera
1. Loosen the M4 bolt in the connection plate to separate the connection plate from the
connection pole.
2. Route the incoming cables through the cable slot of the bottom of the connection plate and
then through the center hole of the connection plate.
3. Place the connection plate against the ceiling and mark the location of the center hole and the
four perimeter mounting holes.
4. Pre-drill the four perimeter holes as marked on the ceiling for the bolts, using a drill bit that is no
wider than the expansion bolt.
5. Drill a 50-mm (approximately 2 in.) center hole to route the cables, if routing cables through the
ceiling.
6. Insert a bolt into each pre-drilled perimeter hole. Then align the connection plate with the bolts
and secure the plate to the ceiling with four (4) nuts.
Note:
For outdoor applications, apply silica gel to the surface of the connection plate, the ceiling,
and to the cable slot prior to securing to the ceiling.
16
