Dahlert DT-WP-22, Инструкция по эксплуатации

Страница: 3 / 48

1
Safety Warning
The followings are the content of [prohibited]
Protect from
sunlight
Inflammable materials
prohibited
Wet areas
prohibited
Do not touch
with wet hand
• It is forbidden to flush the machine body with water.
• It is forbidden to use universal socket and use with other appliances at the same time, and
sockets with no less than 10A shall be used.
• It is strictly prohibited to put the water receiver in the air since it shall be put stably on the table.
• It is strictly prohibited to wipe the water tank with alcohol.
• It is forbidden to add cloudy tap wate
r, ice blocks and mixed liquids such as milk, juice and so on
in the water tank.
• When taking wate r, it is strictly prohibited to extend the water nozzle into the cup so as to avoid
the danger cause by blockage of water nozzle by boiling water.
Grounding is required
The followings are the content of [compulsory]
• If the power cable is damaged, please replace it by the manufacturer or professional technician
of the authorized repair office, avoid extrude, overlay, tie or damage the power cable.
• The bottom and the perimeter shall not be padded with other items.
• The suitable temperature of purified water in water tank is 4-38°C.
• The socket for power cord connecting this product must be provided with reliable grounding
device.
• When the ambient temperature is below 0°C, t he water in the machine may freeze, please note
that the water in the machine is drained when it is not in use.
The followings are the content of [note]
• In order to avoid hazards, please place the ma chine on the flat, clean and heat-resistant table.
• Handle the product with care so as not to scratch or damage the product.
• Protect the machine from rain and snow durin
g handling and storage.
• When the raw water does not conform to municipal tap water standard (including conditions
such as high sediment content in water and over-standard residual chlorine, etc.), the service life
of the filter will be reduced quickly, and the raw water is recommended to be pretreated and then
added to the water tank.
• When taking out the water tank, make sure the machine is stable and prevent the machine from
falling.
• Clean and replace the filter regularl y. The new machine shall be cleaned for the first time as
required.
• When the water temperature is lo w, the water production time of the water tank will be
prolonged, which is the characteristic of the membrane.