Dahl VARIODOCK, Руководство по обслуживанию

Страница: 14 / 19

26 27
!
Maintenance manual, installation and user guide UK Dahl VarioDock™
!!
Dahl VarioDock™ has also been tested and approved for anchoring Dahl COMFORT
Seat with integrated 3-point seat belt, placed on seat row 2 or behind, in a number of
vehicle models.
Using VarioDock™ for anchoring the Dahl COMFORT Seat with an integrated 3-point
seat belt requires a particularly strong reinforcement kit for the vehicle floor which is
designed, tested and approved for the specific vehicle and installation position.
In the event of a collision, the vehicle’s floor will be subjected to a much higher
torque / load when using a seat with integrated seat anchorage points, than when
using a wheelchair, where all seat anchorage points are rooted in the vehicle body
and floor.
Please see the current delivery programme of approved and vehicle-specific anchor-
ing kits in our product catalogue, which can be downloaded from our website
http://wtors.com
WARNING!
Risk of death or serious injury
Anchorage of Dahl COMFORT Seat
with integrated 3-point seat belt
Do not use VarioDock™ to anchor Dahl COMFORT Seats or other seats with integrated seat belt anchor points, if the vehicle has not been fitted with an
approved reinforcement kit for VarioDock™.
If a reinforcement kit that has been approved for this use has not been fitted, there is a risk that the user and other passengers in the vehicle may
suffer serious or fatal injuries during a collision as a result of the vehicle floor being deformed severely or the anchoring points of the docking station
being torn loose.
Therefore, ask your dealer if a VarioDock™ reinforcement kit approved for anchorage of Dahl COMFORT Seat has been
fitted to the vehicle and mounting position prior to commissioning.
Seat bases for
original driver’s seats
In addition to being approved for wheelchair tie-down, Dahl
VarioDock
TM
has also been tested and approved for anchoring
a number of original car manufacturers’ seats.
We offer seat bases with pre-drilled holes that fit a number
of car manufacturers’ original driver’s seats and their original
seat heights. These seat bases can be anchored in the Dahl
VarioDock
TM
and placed in the vehicle’s 1st seat row, allowing
the driver and passenger to swap places.
Our seat bases are tested in accordance with ECE Regulations
14 and 17.
Do not use the VarioDock
TM
for anchoring a car
seat which has not been tested and approved.
Always make sure that the vehicle floor is
approved for use of seats with integrated
3-point seat belt.
WARNING!
Risk of death or serious injury!
Please see current delivery programme with approved kits in
our product catalogue, which can be downloaded from our
website http://wtors.com