DAHAO 41 Series Скачать руководство пользователя страница 203

Страница: 203 / 268

2.9.1 LCD Test

Function

：

In the test mode, press

to activate LCD test

function. Click the area other than

to have LCD

screen display white, black, red, green and blue so that
user can judge whether the LCD screen has problem.

Press

to return to the upper level interface.

2.9.2 Touching Screen Correction

Functions

：

Under test mode, press

to display the

interface for ID input, as shown on the right. Then input

the ID and press

to enter touch screen correction

function.

User has to correct 5 spots. The touching pen is

recommended to be used at touching the cross icon on
the interface. After the correction, the system will
display the result of this operation

[Note]: During the correction, please perform the
operation strictly according to the position of the
cross icon, otherwise the touching screen may be
unable to be used normally after the correction.

Содержание 41 Series












































































































































































































































































Результаты поиска

Содержание 41 Series

Отзывы:

DAHAO 41 Series, Руководство пользователя, Страница: 203 / 268

Результаты поиска

Содержание 41 Series

Отзывы: