DAHAO 41 Series, Руководство пользователя, Страница: 192 / 268

setting setting 1:Reverse
16
、
Home Position
No. Brief description Detailed instructions Unit
Step
length
Range
Factory
value
Type
057
The presser foot action
when the starting point
of sewing moves after the
origin detection
Origin foot action
0: Press down the presser foot
after returning to the origin
1: After returning to the
origin, the presser foot is
lifted
1 Choose
250
Mechanical origin reset
at the end of sewing
Whether to retrieve the
origin after sewing
0: No origin search, stop in
situ
1: Origin (sub-origin)
retrieval
2: Back up seam point
3: Go straight back to the
origin
1 Choose
254
The route of movement
towards the origin
position and the starting
point of sewing
Normal origin
retrieval/origin reset
circuit selection
0: standard
1: reverse
2:Y axis to X axis
3:X axis to Y axis
4: x, y axis synchronous
0 Choose
270
Origin action when
pattern switching
Origin action when
pattern switching
0: No origin retrieval action
1: The origin retrieval action
is not carried out, but it
passes through the regional
center
2: Perform the origin
retrieval action
0 Choose
450
The starting point
movement mode when the
pattern is switched
The origin action when
switching patterns
0: Step on the pedal to start,
and then move to the new
pattern starting point
1: While switching patterns,
move to the starting point of
the new pattern
0 Choose
Q-1 It goes back to the origin It goes back to the origin
0:OFF:Don't return to home
position
1:ON:Return to home position
0 Choose
Q-2
Lifting back to the
origin is prohibited
Lifting back to the
origin is prohibited
0:OFF:Permit returning to
home position
1:ON:Forbid returning to home
position
0 Choose