![background image](http://html1.mh-extra.com/html/daga/thermal-wraps/thermal-wraps_directions-for-use-manual_499662007.webp)
ENGLISH
7
B&B TRENDS, SL. declines any liability for any damage that may
be caused to people, animals or objects owing to the failure to
observe this warning correctly.
INSTRUCTIONS FOR USE
The battery must be connected to the charger and select the ON
position in order to be charged, indicated with the symbol on the
slider of the front of the battery.
Fig. 1
Then check that the voltage of the mains to which you are going to
connect the charger is within the range indicated on the label of
this product and connect the charger to the mains.
The charging time is approximately 3hrs.
The charger LED will light up in green to indicate that the battery is
fully charged. When the LED is lit up in red, this indicates that the
battery is not fully charged.
Fully charge the product the first time it is charged.
Once the battery is charged, select the OFF position and unplug the
charger from the mains. Then disconnect the battery charger.
Place the wrap in the area of the body it is intended for. Adjust it to
your measurements by using the velcro of the product.
Place the battery in the pocket indicated for the same and connect
the battery in the wrap wiring.
Connect the battery by selecting the ON position. The wrap will
begin to heat up in a short time.
You can check to see when the battery is dead by checking the blue
LED of the battery, which will turn off.
IMPORTANT:
When you turn on the battery, the blue LED does not indicate that
the battery is charged. It must be connected to the charger and
connected to the proper mains as indicated on the label to find out
if it is fully charged.
To turn off the battery, the OFF position must be selected on the
slider of the front of the battery.
Let the thermal wrap cool down prior to folding it for storage and do
not place objects on top of it.
ON
Switch to ON position when charging
OFF
Manual Vendajes térmicos.indb 7
1/10/15 9:07