DNPB328 Operation Manual
TOOL CAPACITY
Blind rivnuts M3 – M4 – M5 – M6 – M8 all materials and styles.
TOOL SPECIFICATIONS
Air supply pressure:
0.5Mpa ~ 0.7Mpa
Output traction power:
14,000N ~ 19,600N
Stroke:
1mm ~ 7mm adjustable
Net weight:
1.70kgs
GETTING STARTED
Please refer to the
TOOL EXPLOSIVE ILLUSTRATION
and the
PARTS LIST
in this manual
in order to have a good understanding of the tool parts described. The descriptions of the tool
parts appear in this manual are in
italics
with the parts position
numbers
corresponding to the
tool explosive illustration.
1. This pneumatic powered tool should be used with a compressed air supply. It is
recommended to use an air hose with a diameter bigger than 8 mm.
2. Before connecting the tool to the compressed air supply, check that the compressed air
pressure is within the specified range of between 0.5Mpa ~ 0.7Mpa. Once the air pressure
has been confirmed, connect the air hose adaptor onto the tool
air adaptor (#58)
. The air
adaptor comes in different versions in different countries. Normally the tools are equipped
with the correct version for your country as default, however, if the air adaptor you have
received does is incorrect, please contact the tool distributor(s).
3. Before using the tool, ensure that you are using the correct
mandrel (#1)
and
anvil (#2)
according to the size of the rivnut to be set. This tool is equipped with mandrels and anvils
from M3 to M8 in the kit. For convenience, 5 identical
locknuts (#65)
are provided in the tool
kit for each size
mandrel (#1)
and
anvil (#2)
in pairs.
a) Remove the
anvil (#2)
and the
locknut (#65)
from the tool:
b) Remove the
knurled cover (#12)
and
nose pedestal (#10)
:
All manuals and user guides at all-guides.com