74
• Recording a TV program is
impossible.
• Once pressing “REC”, a videotape
is ejected automatically.
• Timer recording of Cable TV does
not work.
• In spite of pressing “CHANNEL”, a
channel can not be set.
• While duplicating, screen is not
clean and distorted.
➤
Check whether a tape attached with a recording tap is inserted.
➤
Check whether the screen is displayed in VCR Only Channel.
Press [OUTPUT] button in this remote controller to adjust in
"General Broadcast" condition.
➤
Is the rounded line (coaxial cable) connected in "ANT.IN"
terminal?
➤
Is the selected channel number shown in Display?
➤
Is a tab of cassette tape broken? (Please cover a tab hole with
cellophane adhesive tape (Scotch tape).)
➤
Please check whether the clock is right.
➤
Does the display on your video show “ ” (Ready to timer
recording)? Please make it out.
➤
Please check whether the timer recording info is right.
➤
Please check a tab on a tape whether it is broke or not. (If it was
broken, please scotch-tape it)
➤
Was a cable data output code connected correctly?
➤
Were a converter manufacturer setup and output channel right?
➤
Did you enter a password? (Please cancel it.)
➤
Did you turn off your player? (Please turn it on.)
➤
You may not memorize channels.
➤
Please check your channel setting or press a number button.
➤
Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be
duplicated in a good condition.
Checks
Symptom
• The remote control does not work.
• Buttons on the remote control do
not work.
■
remote control
➤
Battery may be weak or exhausted.
➤
A receiver of the remote control may be different with a sender.
➤
In case a videotape is positioned in the beginning, “VISS REW”
and “REW” do not work.
➤
In case a videotape is positioned in the end, “FF”, “VISS FF”,
“PLAY” and “REC” do not work.
➤
Please check whether another button is pressed.
DVD-Video(PAL) 02.3.15 5:45 PM ˘
`
74
