Daewoo Mega 250-V, Руководство по эксплуатации и техническому обслуживанию

Страница: 43 / 212

K1000896E Operation and Maintenance Manual Operating Controls 2-11
To adjust the steering wheel height, push
down on adjustment lever (1, Figure 12)
and move the steering wheel to the
desired position.
Release the adjustment lever (1, Figure
12).
The steering wheel will remain in the
desired position.
6. BRAKE PEDAL (RIGHT AND LEFT
PEDALS)
Pressing brake pedal will apply the brakes
to the loader. The brake pedal modes can
be switched from "INCHING" to "NO
INCHING" or vice versa, by using the
transmission cutoff switch (See page
2-31).
CAUTION!
When descending on an incline, slow
down the machine by using both the
brake pedal and the engine brake.
Using the brake pedal too often
might lead to insufficient oil
pressure, thus making it difficult to
brake the loader.
IMPORTANT
Do not use brake pedal as a foot rest.
This will cause brake disk to wear
faster than normal, and this could
cause brake failure.
TILTING
TELESCOPIC
BSO0070L
Figure 12
Figure 13