Daewoo Mega 250-V, Руководство по эксплуатации и техническому обслуживанию

Страница: 162 / 212

4-52 Inspection, Maintenance and Adjustment K1000896E Operation and Maintenance Manual
1. Slowly open the radiator cap (Figure 87) to
allow any pressure to escape.
NOTE: See “Fluid Capacities” on
page 4-5 for capacity and
“Table of Recommended
Lubricants” on page 4-3.
2. Place a container under the radiator and
open the drain valve (Figure 88).
3. Remove coolant drain plug (Figure 89)
from engine.
4. Open heater shutoff valves (Figure 91 and
Figure 92) to allow coolant to drain from
heater core.
5. Install drain plug, and close drain valve
after coolant has completely drained from
system.
6. Fill cooling system with a flushing solution.
7. Run engine at low idle until the coolant
temperature gauge reaches the "GREEN
ZONE." Run engine for another 10
minutes.
Figure 88
AOO0250L
Figure 89 (S/N 3001 thru 4000)
APO0171L
Figure 90 (S/N 4001 and Up)
AOO0130L
Figure 91 (S/N 3001 thru 4000)