Daewoo KOT-1G1A, Руководство по обслуживанию, Страница: 24 / 58

23
15. REPLACING THE HIGH-VOLTAGE TRANSFORMER
1. Remove the vent grille and the cabinet from the microwave oven (See FIG. 1).
2. Discharge the high-voltage capacitor.
3. Remove 4 screws from the H.V. Transformer and save the screws.
Refer to FIG. 15 for the following steps:
4. Unplug the five high-voltage transformer wire connectors and remove high voltage transformer.
5. Mount the new high-voltage transformer to the plate with 4 mounting screws you removed earlier.
6. Connect 5 wire connectors going to the high-voltage capacitor, the high-voltage transformer, and the magentron as
shown in FIG.15.
FIG. 18
WARNING :
Personal Injury Hazard
Disconnect from the electrical supply before servicing the unit. Failure to do so could result in electrical shock or
other personal injury.
CAUTION :
Personal Injury Hazard
Because of the weight and size of the microwave oven, two people are required to safely move and install it.
Failure to do so could result in personal injury.
NOTE :
Personal Injury Hazard
Disconnect from the power supply, before servicing the unit. Discharge the capacitor using a 20,000 W
discharge resistor, or an insulated plastic-handle screwdriver to short across the capacitor terminals.