Daewoo KOT-170S0A, Руководство по обслуживанию

Страница: 32 / 70

31
9. Mount the magnetron cover lamp to the new magnetron with its 1 mounting screw.
10. Position the new magnetron so that the magnetron the cover lamp the front of the oven, and mount the magnetron to
the top of the chassis with its four mounting hex unts. Make sure that you tighten the nuts securely.
11. Connect the red high voltage leads to the magnetron terminals.
12. Refer to “Cabinet Installation” and reinstall the Air guide top, supporter, powercord, wire protector, the cabinet, control
panel and the vent grille on the microwave.
13. Reinstall the micowave oven in its mounting location.
FIG. 20-1