Daewoo KOT-170S0A, Руководство по обслуживанию, Страница: 24 / 70

23
14. REPLACING THE FAN MOTOR
1. Remove the microwave oven from its mounting location.
2. Remove the vent grille, the wire protector and the cabinet from the microwave oven (See Cabinet Removal).
3. Remove the screw from the top center tab of the control panel.
Refer to the inset and perform the following steps:
4. Unplug the fan motor wire connectors from the motor terminals, and remove the fan motor assembly.
5. Pull the fan blade and compression washer off the shaft of the defective fan motor.
6. Remove the two motor mounting screws from the fan motor and remove it.
7. Mount the new fan motor to the fan motor housing with the two mounting screws.
8. Slide the fan blade.
9. Connect the fan motor wires to the fan motor terminals.
– Reassembly
1. Connect the wiring to the control panel circuit board, and then mount the control panel to the oven with its mounting
screw.
2. Refer to Cabinet Installation, and reinstall the cabinet and the vent grille on the microwave oven with its mounting
screw.
3. Reinstall the microwave oven in its mounting location.
FIG. 15
WARNING :
Personal Injury Hazard
Disconnect from the electrical supply before servicing the unit. Failure to do so could result in electrical shock or
other personal injury.
CAUTION :
Personal Injury Hazard
Because of the weight and size of the microwave oven, two people are required to safely move and install it.
Failure to do so could result in personal injury.