Daewoo KOR-6NF7, Руководство по эксплуатации

Страница: 14 / 15

12
SPECIFICATIONS
POWER SUPPLY 230V~ 50Hz, SINGLE PHASE WITH EARTHING
POWER
1,200 W
MICROWAVE
CONSUMPTION
OUTPUT POWER
800 W (IEC705)
FREQUENCY 2,450 MHz
OUTSIDE DIMENSIONS 465 X 279 X 324 mm
CAVITY DIMENSIONS 301 X 230 X 283 mm
NET WEIGHT APPROX. 11.4 Kg
TIMER 35 MIN. DUAL SPEED
POWER SELECTIONS 7 STAGES
* Specifications are subject to change without notice.
QUESTIONS AND ANSWERS
* Q : I accidentally ran my microwave oven without any food in it.
Is it damaged?
* A : Running the oven empty for a short time will not damage the
oven. However, it is not recommended.
* Q : Can the oven be used with the glass tray or roller guide
removed?
* A : No. Both the glass tray and roller guide must always be used in
the oven before cooking.
* Q : Can I open the door when the oven is operating?
* A : The door can be opened anytime during the cooking operation.
Then microwave energy will be instantly switched off and the
time setting will maintain until the door is closed.
* Q : Why do I have moisture in my microwave oven after cooking?
* A : The moisture on the side of your microwave oven is normal. It
is caused by steam from cooking food hitting the cool oven
surface.
* Q : Does microwave energy pass through the viewing screen in
the door?
* A : No. The metal screen bounces back the energy to the oven
cavity. The holes are made to allow light to pass through. They
do not let microwave energy pass through.
DO NOT ATTEMPT TO SERVICE THE OVEN YOURSELF !
IMPORTANT
WARNING: This appliance must be earthed.
The wires in this mains lead are coloured in accordance with the following code.
Green-and-yellow : Earth
Blue
: Neutral
Brown : Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the
letter ‘E’ or by the earth symbol or green-and-yellow. The wire which is coloured blue must be connected to the terminal
which is marked with the letter ‘N’ or coloured black.
The wire which is colured brown must be connected to the terminal which is marked with the letter ‘L’ or coloured red.