background image

15

DO THIS...

6. Touch POWER pad.

7. Touch the number pads for the

power level you want in the
second stage.

8. Touch the number pads for the

cooking time you want in the
second stage.

9. Touch START pad.

THIS HAPPENS...

The STAGE2 indicator lights and “P-”
is displayed.

The display will show what you
touched. 

The display will show the numbers you
pressed in the order you touched.
This example shows 4 minutes 20
seconds at power level 8.

START

0

2

4

8

POWER

STAGE

DEFROST

1                   2            WEIGHT            TIME   

AUTO

START

LOCK              NO          CUPS

                   g

LOCK              NO          CUPS

                   g

LOCK              NO          CUPS

                   g

STAGE

DEFROST

1                   2            WEIGHT            TIME   

AUTO

START

STAGE

DEFROST

1                   2            WEIGHT            TIME   

AUTO

START

When you touch START pad, the WEIGHT DEFROST, STAGE 1 and STAGE 2
indicators come on to confirm the power levels selected. The WEIGHT DEFROST
indicator starts blinking to show you that the oven is in WEIGHT DEFROST mode.
The display counts down the time remaining in WEIGHT DEFROST mode. Turn over,
break a part and redistribute at a beep.
At the end of WEIGHT DEFROST mode, the oven will beep and start stage one. The
WEIGHT DEFROST indicator goes off and the STAGE 1 indicator starts blinking. The
display counts down the time remaining in stage one.
At the end of stage one, the oven will beep and start stage two. The STAGE 1
indicator goes off and the STAGE 2 indicator starts blinking.
The display counts down the time remaining in stage two when stage two ends, you
will hear 3 beeps.

Содержание KOR-145M0P































































Отзывы: