8
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3- pronged 230V AC 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
4. Set required programme and time, then touch stert.
5. Once cooking is complete, take care removing container as it will be hot.
1
The oven light is on when the microwave oven
is operating or the door is opened.
2
The oven door can be opened at any time
during operation by opening the door. The oven
will automatically shut off.
3
Each time a pad is touched, a BEEP will sound
to acknowledge the touch.
4
The oven automatically cooks on full power
unless set to a lower power level.
5
The display will show ":0" when the oven is
plugged in.
6
When the STOP/CLEAR pad is touched during
the oven operation, the oven stops cooking and
all information retained.
To erase all information, touch the
STOP/CLEAR pad once more. If the oven door
is opened during the oven operation, all
information is retained.
7
If the START pad is touched and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.
WATTAGE OUTPUT CHART
• The power-level is set by touching the POWER pad. The chart shows the display, the power level and
the percentage of power.
Touch POWER pad.
Power Level (Display)
Approximate Percentage of Power
once
100
100%
twice
80
80%
3 times
60
60%
4 times
40
40%
5 times
20
20%
Make sure the oven is properly installed and
plugged into the electrical outlet.
An evaluation version of
novaPDF
was used to create this PDF file.
Purchase a license to generate PDF files without this notice.
