Daewoo KOC-8HAT7S, Руководство по обслуживанию

Страница: 14 / 42

13
(1) To reduce gap located on part ‘A’.
• Loosen two screws on stopper hinge top, and then push the door
to contact the door seal to oven front surface.
• Tighten two screws.
(2) To reduce gap located on part ‘B’.
• Loosen two screws on stopper hinge under, and then push the
door to contact the door seal to oven front surface.
• Tighten two screws.
4. Method to reduce the gap between the door seal and the oven front surface.
NOTE : A small gap may be acceptable if the microwave leakage does not exceed 4mW/cm
2
.