Daewoo KOC-8HAT7S, Руководство по обслуживанию

Страница: 23 / 42

22
SWITCH MOUNTING
BRACKET
PRIMARY
INTERLOCK SWITCH
PRIMARY
INTERLOCK SWITCH
INTERLOCK
MONITOR SWITCH
YL, BL
YL, BL
WH, BL
WH, BN INTERLOCK
MONITOR SWITCH
RD
RD , BK
BK
BL
RD , BK RD , BK
RD
RD
BL
DOM SWITCH DOM SWITCH
WH, BL
WH, BN
RD
RD , BK
BK
BL
BL
(3) Adjustment steps
a) Loosen the one mounting screw.
b) Adjust interlock switch assembly position.
c) Make sure that lock lever moves smoothly after adjustment is completed.
d) Tighten completely two mounting screws.
(1) Primary interlock switch
When the door is closed, the hook locks the oven door. If the door is not closed properly, the oven will not operate.
When the door is closed, the hook pushes the button of the microswitch. Then the button of the primary interlock switch
bring it under ON condition. (No position)
(2) DOM switch and interlock monitor switch
When the door is closed, the hook pushes the lock lever downward. The lock lever presses the button of the interlock
monitor switch to bring it under OFF condition (No position) and presses the button of the DOM switch to bring it under
ON condition. (No position)
PARTCODE : 3513819690
The door lock mechanism is a device which has been specially designed to completely eliminate microwave radiation when
the door is opened during operation, and thus to perfectly prevent the danger resulting from the leakage of microwave.
ADJUSTMENT :
Interlock monitor switch
When the door is closed, the interlock monitor switch should be opened (No position) before other switches are closed.
When the door is opened, the interlock monitor switch should be closed (No position) after other switches are opened.
NOTE :
Microwave emission test should be performed after adjusting interlock mechanism.
If the microwave emission exceed 4mW/cm 2 , readjust interlock mechanism.
7. INTERLOCK MECHANISM AND ADJUSTMENT