Daewoo FRAH52WD3B, Инструкция пользователя

Страница: 13 / 20

#
8
6
19
9
1&
&
:0 6: 6
:" 6: 6
:" 6: . 6
:" 6:+ 6
& !!
$ &!
! 5
00#! !
7
,
# 2
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
This appliance MUST BE PLUGGED in an EARTHED SOCKET. The power supply cable plug is provided with a contact for this
purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with
current regulations, consulting a qualified electrician.The manufacturer declines all responsibility if the above safety precautions
Leave the appliance to stand for 2 - 4 hours before switching on to allow the gases to settle.
Wait 2-3 hours until the inside gets cold enough after the first power plug-in, then store foods inside(There can be some smell
on initial operation of the fridge after plugging in. The smell fades away as the fridge works and doors are opened
and closed).
The appliance can be noisy for first 7-10 days whilst setting.
The door seals may seem very tight for the first few days. This is normal and does not indicate a fault.
General installation
11