MOTION DETECTED RECORDING (MOTION RECORD)
24
Digital Video Recorder
10
Go to the “RECORD GROUP SET”.
11
Press the channel button(s) you wish to activate ‘motion
detected recording’.
12
Then, ‘M’ is appeared next ‘F/S’.
13
To complete the setting and exit, press [MENU] button or
[SHUTTLE HOLD] button.
✍
NOTE . . .
1 REC LED on the front panel flashes on the standby mode of
Motion recording.
2 There may be cases when the recorder’s built-in motion detection
function does not operate properly due to the condition of the
input video signal or other factors.
3 It is recommended selection of at least 3 motion blocks to get
more accurate motion recording.
4 Each channel starts motion recording separately with time
interval upon on the motion detected.
RECORD GROUP SET
DEFINE GROUP
GROUP1
PICTURE QUALITY HIGH+
CAMERA1
30 F/M M
CAMERA2
07 F/S –
CAMERA3
07 F/S –
CAMERA4
06 F/S –
CAMERA5
06 F/S M
CAMERA6
07 F/S –
CAMERA7
06 F/S –
CAMERA8
03 F/S –
MOVE
1-8
MO
œ √
SET
OK
CANCEL
…
†
2
3
4
MOTION
●
0031:13
JUN.05.2003 THU 11:27:22 0052G
1
5
6
7
8
Motion Detected Recording
Motion Detected channel flashes and turns
to yellow color when it starts recording.
