Daewoo DWF-200AS, Руководство по обслуживанию

Страница: 11 / 41

10 FEATURE
Much lint may be obtained according to the kind of
clothes to be washed and some of the lint may also
sticks to the clothes.
To minimize this possibility a lint filter is provided in
the center of pulsator agitator to filter the wash water
as it is discharged from the water channel. It is good
to use the lint filter during washing.
HOW TO REPLACE LINT FILTER
1
Pull the cap agitator upward.
2 Turn the lint filter inside out, and wash the lint off with water.
3
Return the filter as it was, and fix the filter lint into the pulsator agitator.
When the START/HOLD button is pressed, the residual time (min.) is displayed on the time indicator, and it will be
counted down according to process.
When operation is finished, the TIME INDICATOR will light up
.
STRUCTURE
FUNCTIONAL PRINCIPLE
1
When the DRAIN MOTOR connected to the power source, the DRAIN MOTOR rotates with 900 r.p.m and revolves
the pulley by gear assembly for reducing.
2
When the pulley is rotated, the pulley winds the wire to open the drain valve.
3 Therefore, rotation of pulley changed to the linear moving of wire.
4
The wire pulls the brake lever of Gear Mechanism Ass’y within 5 seconds.
5 After the wire pulled, gear assembly is separated from motor and condition of pulling is held by operation of the
lever.
6 When the power is turned off, the drain valve is closed because the wire returns to original position.
Bleach Inlet
Pulsator
Agitator
Pull
Loosen
Pulley
Lever
Inductive ring
Magnet
Coil of motor
Magnet of motor
Lint Filter
Residual Time Display
D r a i n M o t o r
Bleach
Inlet
Pulsator
Agitator