Daewoo DWF-200AS, Руководство по обслуживанию

Страница: 7 / 41

6 CONVENIENCE
How To Clean The Filter
4 Remove the dirt
from the inlet filter
with a brush.
1 Pull the
power plug
out before
cleaning it. 2 Turn off the
water supply
to the washer
and sperate the
inlet hose. 3 Pull the
inlet filter out.
CLEANING THE LINT FILTER
CLEANING THE WATER INLET FILTER
• Clean the filter when water leaks from, the water inlet.
CLEANING THE DRAIN FILTER
• In case “U” shape drain hose, this filter’s equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be caused.
1
Put down the
remained water in the
hose. And put a container
under the filter to collect
water.
2
Turn the cap counter
clockwise.
3
Pull out the filter assembly off
the case of the main body.
6
Turn the cap clockwise tightly.
4
Clean the drain filter
removing the foreign
stuffs.
5
Put in the filter along the
guiding prominence of the
case. Please note the left
position of the filter adjusting
the groove to the guide rib.
FILTER
CONTAINER
CAP
SLIT
CASE
FILTER
CAP
CAP
FILTER
CAP
FILTER
CASE
GUIDE
RIB
SLIT
CAP
1
Pull the cap agitator
upward.
2 Pull the filter lint
upward.
3
Turn the filter lint upside down,
wash to the lint off with water.
4
Return the filter assy as it was, and
insert it into the pulsator agitator.