Daewoo DTM-29U7Z SERIES, Руководство по обслуживанию

Страница: 40 / 50

10 656IO7 I/O Leave open Digital input / output (MSB)
11 VSSP2 S Supply voltage for digital (0 V pad)
12 VDDP2 S Supply voltage for digital (3.3 V pad)
13 SCL I I
2
C-Bus clk
14 V
2)
I Connect to
vss Vertical pulse for RGB input
15 656IO6 I/O Leave open Digital input / output
16 656IO5 I/O Leave open Digital input / output
17 HOUT O Leave open Horizontal output (Single or double scan, depen-
dent on version)
18 H50
3)
O Leave open Hout 50 Hz (with skew)
19 ADR / TDI I I
2
C address / test data in
20 V50
4)
O Leave open Vout 50 Hz
21 656IO4 I/O Leave open Digital input / output
22 656IO3 I/O Leave open Digital input / output
23 VOUT O Leave open Vertical output (Single or double scan, dependent
on version)
24 RESET I Reset input (Reset when low)
25 VDDP3 S Supply voltage for digital (0 V pad)
26 VSSP3 S Supply voltage for digital (3.3 V pad)
27 CLKOUT O Leave open Output clock (27 MHz nom.)
28 VDDD3 S Supply voltage for DRAM (1.8 V digital)
29 VSSD3 S Supply voltage for digital (0 V digital)
30 656IO2 I/O Leave open Digital input / output
31 656IO1 I/O Leave open Digital input / output
32 656IO0 I/O Leave open Digital input / output (LSB)
33 VSSD4 S Supply voltage for digital (0 V digital)
34 VDDD4 S Supply voltage for digital 1.8 V digital
35 VDDAFBL S Supply voltage for FBL (1.8 V)
36 VSSAFBL S Supply voltage for FBL (0 V)
37 FBL1 I Connect to
vss Fast Blank input 1 (H1) (Analog input)
38 FBL2 I Connect to
vss Fast Blank input 2 (H2) (Analog input)
Pin
No. Pin Name Type Connection
(If not used)
Short Description
8
IC DESCRIPTION
APPENDIX